European Utility Ploughing Specialists

Quite simply, Cable Plough is the most efficient, environmentally friendly and effective way of installing pipes and cables below ground.

At a time when traditional open-cut methods of service laying are coming under increased scrutiny because of environmental and ground reinstatement issues, the Cable Plough's efficient and low-impact method means that any complications when restoring and subsequently handing back land are dramatically reduced.

This aspect of the Cable Plough's operation is particularly significant when working in areas of outstanding natural beauty such as National Parks, SSSIs, or areas which are particularly sensitive to ecological and environmental issues. Consequently, it provides designers and specifies an opportunity to soften the impact of schemes when route planning.

Because Cable Plough causes minimal disruption to the ground's geological structure, it offers a significant reduction in time, money and risk for the client and contractor. It also operates very effectively on soft ground and marshland, has the ability to work on almost any terrain and manoeuvre around most obstacles.

Added to this, as it cuts, installs and back-fills - all in one operation - the Cable Plough's method eliminates any risk of trench-collapse and associated health and safety concerns. It also provides a huge increase in productivity over and above traditional ways of working.

Cable Ploughing

Benefits of Cable Ploughing


The most significant advantage of the Cable Plough is its low-impact on the environment. Whilst traditional methods of pipe and cable installation require a sizable trench to be dug and then refilled, the Cable Plough's efficient way of cutting a narrow slit into the soil causes only minimum disturbance to the land.

 For local authorities and planners, the laying of supply lines can pose huge problems, especially when installations pass through protected countryside or areas of outstanding natural beauty.

 Initially, ATP will carry out a site survey and report back any issues to the client. Then, with little or no preparatory work required – such as removing top-soil, extracting large stones or excavation; work can begin.

 With only a narrow cut into the ground, there is little damage and therefore no structural changes to the geological formation of the earth. Then, with an almost automatic closure process, it does not take long for the area of land to return to it's original and natural state.



Whether it is flat, hilly, or undulating terrain, the adaptability of the Cable Plough enables it to cope with almost any surface. It is also capable of operating in wet and adverse areas, such as across marshland, through ditches and even into rivers, provided the water is no more the 1m deep.

 The all-round flexibility enables it to plough around or adjacent to a variety of obstacles, such as: rocks, trees, barriers, hedges and walls, by lifting or moving the jibs and positioning the wheels to one side, or around the object.

 Because of its agility, the Cable Plough is ideal for carrying out roadside projects, as signs, fences and barriers can easily be negotiated and need not be moved. It can even follow curves in the road to a radius of 4m. Also, because of way it installs, reinstatement of the ground is easily carried out, so there is less likely-hood of having to hold up traffic, or the need to have staff working on the roadside for lengthy periods of time.



As well as the cost to the environment, the conventional methods of laying pipes and cables can be extremely labour intensive and time consuming. As the Cable Plough cuts into the ground, installs and backfills in one operation, it can cover a far greater distance in a day. In fact, if conditions allow it can work at a speed of up to one kilometre per hour!

 Because of the way the Cable Plough operates, it requires less manual input than traditional methods, especially when it comes to reinstatement. It is also capable of carrying three drums of cables or pipes at once - another factor which adds to its efficiency.

 It is also efficient in the way it makes installations. The unique design of the combined blade and guidance system means that pipes and cables are laid exactly in accordance to regulations – whatever the speed of travel. In fact, inspections have proved that installations carried out by the Cable Plough are of better and more uniform quality than that of open trench methods.



Each installation project starts with the power-winch being safely sited ahead of the Cable Plough in an area where it can secure itself by dropping its anchor into the ground. However, in the case of roadside installations, the winch is capable of gripping to the aspahlt without the need of its anchor.

The Cable Plough is capable of installing everything from a small cable to a 180mm diameter pipe. In one operation it can install several cables and/or pipes, plus lightening conductors and warning tapes. This includes high-voltage cables, up to 110 KV in the prescribed triangular combination, or two systems with a lateral spacing of 120mm. Please refer to the installation table for further details.

The laying depth is infinitely adjustable to a depth of 2 metres and, installations can be carried out in nearly all ground conditions, such as dry soil, marshland and even soft rock.

The Cable Plough's operation means that its cutting blade is controlled in such a way that the insertion angle is adjusted to the curvature of the earth. This means that cables and pipes are carefully laid, with no strain or tension.

As the blade cuts through the earth is creates a channel that forms the installation bed. As the Cable Plough continues forward, the aperture is firmly closed to approximately half its depth and the earth forms a bridge over the cable or pipe. Therefore, the lower part of the cut remains open and is gradually filled by the penetration of silt.

Cable Plough Applications

Cable Plough Applications


  • Telecomms
  • Fibre optic - ZERO TENSION
  • Communication ducts
  • Copper cables
  • Roadside communication lines


  • High voltage cables up to 132kV
  • Electrical ducts
  • Lightning protection and warning tape
  • DC Cables and ducting
  • Sub Sea Cable


  • HDPE up to 620mm at present

Water & Sewerage

  • HDPE up to 620mm at present


  • Multiple cables, ducts and warning tape

Cable Plough Applications


Jason Thomas
(+44) 07969 225476
(Managing Director)

Ben James
(+44) 07557 516273
(Operations Manager)